How to determine veterinary needle specifications: gauge, hub size, and an OEM procurement guide
Category: News Center
Publication Date:2026-08
Summary: This article systematically outlines the key parameters that must be verified when procuring veterinary needles, including gauge, needle‑tube length, hub specifications, tip design, material, connection type, and OEM packaging requirements. It also clarifies the differences among 12 mm, 13 mm, 14 mm, and 18 mm hub sizes and corresponding needle‑tube lengths. By providing examples of models such as WJ306, WJ307, WJ308, WJ309, WJ310, WJ311, and WJ313, this guide helps distributors, importers, and OEM customers mitigate procurement risks related to hub‑needle mismatches, discrepancies between samples and bulk orders, and errors in packaging labeling.
How to determine veterinary needle specifications: gauge, hub size, and an OEM procurement guide
A quotation for veterinary needles may appear to include all the relevant specifications, yet it could still overlook critical details that truly affect the purchasing decision.
For example, while the needle gauge of the syringe may meet the specifications, the needle hub might not be compatible with the customer’s existing syringes; and even if two needles have the same outer diameter, their inner diameters can still differ due to variations in wall thickness. Furthermore, in some orders, although the sample has been approved, the bulk production uses a different needle‑hub connection method or packaging specifications, which ultimately gives rise to disputes.
Therefore, for distributors, importers, and OEM customers, “18G veterinary needles” do not constitute a complete procurement specification. In addition to the gauge (G), it is also necessary to confirm the needle length, hub type, tip design, material, packaging, and the compatible syringe model.
G denotes the gauge of the needle, but it does not indicate the overall size of the needle.
G number ( Specifications ) Primarily used to denote the nominal outer diameter of a syringe.
It should be noted that, in general, the smaller the gauge number, the thicker the needle. For example, a 14G needle is thicker than a 22G needle.
However, G‑number cannot specify the following parameters:
Syringe length
Needle inner diameter
Pipe wall thickness
Needle holder size
Needle holder connection method
Needle tip or perforated structure
The following are reference data compiled according to the dimensions specified in ISO 9626:2016:
| G number | Reference Nominal Outer Diameter |
|---|---|
| 14G | Approximately 2.10 mm |
| 15G | Approximately 1.80 mm |
| 16G | Approximately 1.60 mm |
| 17G | Approximately 1.40 mm |
| 18G | Approximately 1.20 mm |
| 19G | Approximately 1.10 mm |
| 20G | Approximately 0.90 mm |
| 21G | Approximately 0.80 mm |
| 22G | Approximately 0.70 mm |

These figures are suitable for understanding G‑size, but should not be used as the final acceptance dimensions for all products.
Nominal values specified in different standards may vary slightly, and dimensional tolerances also exist in actual manufacturing. Even if two needles share the same gauge and outer diameter, differences in wall thickness can still result in variations in inner diameter and fluid‑passing capacity.
Therefore, when there are specific requirements for the syringe’s inner diameter or flow rate, the purchaser should request product drawings, inner-diameter specifications, or applicable test standards from the manufacturer, rather than relying solely on the gauge number.
The specific needle selection should also take into account the product instructions, the animal species, the injection site, and the recommendations of a qualified veterinarian.
The needle length must be confirmed separately.
The length of veterinary needles is typically expressed in millimeters or inches.
Common conversions between inches and millimeters are as follows:
| Inch specification | Corresponding millimeter |
| 1/2 inch | 12.7mm |
| 3/4 inch | 19.05mm |
| 1 inch | 25.4mm |
| 1½ inches | 38.1mm |
Size G and length are two independent parameters.
The same G‑size can come in multiple lengths, but not all models offer every possible combination. For example, a particular model in 18G may be available in 1/2 inch, 3/4 inch, 1 inch, and 1½ inches, whereas the 16G version might only offer a subset of these lengths.
When making a purchase, it’s best to request the manufacturer’s latest specification sheet for “G‑size × length” to avoid assuming that every G‑size can be produced in all lengths.
A relatively complete request for quotation can be written as:
18G × 1 inch veterinary injection needle, with a specified needle hub type: brass hub, stainless steel needle barrel, 12 needles per box.
This makes it easier to obtain an accurate quote than “purchasing a batch of large‑gauge needles for cattle.”
12mm, 13mm, 14mm, and 18mm are needle holder specifications.
Among the existing veterinary needle specifications listed by Wanjia Instruments, needle hub sizes of 12 mm, 13 mm, 14 mm, and 18 mm are available.
These numbers refer to the needle hub or needle hub model, not the needle length or the needle gauge.
Currently, the model numbers that can be identified in the product documentation include:
| Model number | Key features in the product documentation |
| WJ306 | Needle for dairy cows |
| WJ307 | 13mm large needle holder |
| WJ308 | 14mm large needle holder |
| WJ309 | 18mm large needle holder |
| WJ310 | Circular needle holder |
| WJ311 | Flat-head needle or blunt needle |
| WJ313 | Needle for side-hole animals |
Here, too, it should be noted that 13 mm, 14 mm, and 18 mm should not be directly labeled as “needle seat diameter” without an accompanying engineering drawing.
These are the specification designations used to differentiate needle holders; however, whether they refer to the outer diameter, length, or a specific mating dimension should be confirmed against Wanjia Instruments’ engineering drawings and product specifications.
For customers who need to accommodate legacy syringes, metal syringes, or continuous‑infusion syringes, the needle hub connection is particularly critical. Some products may appear similar in photographs, but their actual mating dimensions can differ significantly.
Before confirming the order, we recommend that the customer provide the model of the syringe currently in use, a needle sample, or the connector dimensions, so that the manufacturer can verify compatibility.
Regular needles and specialized needle types must not be used interchangeably.
Veterinary needles do not come in only one design.
Even when they share the same gauge and length, standard bevel needles, flat‑head needles, side‑hole needles, and other specialized needle types may still serve different application requirements.
Currently, Wanjia Medical Devices’ product documentation includes the following designs:
Veterinary needle holders: Models WJ307, WJ308, and WJ309 feature needle holders of different specifications to accommodate the corresponding devices.
Round needle holder: The WJ310 employs a round needle holder design.
Flat-head needle: WJ311 features a flat or blunt tip design.
Side‑hole needle: In the WJ313, the opening is located on the side of the needle hub.
Dairy Cow–Specific Needle: WJ306 is listed in the product catalog as a needle for dairy cows.
The product name cannot substitute for the official instructions for use.
Before purchasing flat‑head needles, side‑hole needles, or other specialized needle types, it is essential to verify the product’s intended application, specifications, compatible equipment, and operating requirements; do not substitute them solely on the basis of appearance or past purchasing habits.
Materials and connection methods are also part of the product specifications.
The product pages for WJ307, WJ308, and WJ309 on the Wanjia Instruments website indicate that these models feature 304 stainless steel needles and brass needle hubs.
However, material information for a single model cannot be directly applied to the entire needle series. Different models, needle hubs, or customer‑specific customizations may feature varying materials and surface treatments.
When purchasing reusable veterinary needles, it is recommended to verify the following:
Stainless steel grade for syringes
Needle holder material
Surface treatment method of the needle holder
Method for Connecting the Syringe Barrel to the Needle Hub
Interface or thread type
Dimensions and Permissible Tolerances
Product Cleaning and Disinfection Requirements
Is it aseptic packaging?
Whether reuse is permitted and any related restrictions
For OEM orders, tender projects, or markets with specific requirements for product documentation, this information should be clearly organized during the sample approval stage.
Packaging and OEM requirements must be finalized in advance.
Veterinary needles can be packaged in multi‑unit boxes, individually, or in other formats as specified by the customer. WanJia Instruments’ current product catalog includes options such as 10‑needle and 12‑needle packs.
When requesting a quotation from an OEM, it is recommended that the customer provide the following information:
Quantity per box
Single-unit packaging or multi-unit packaging
Brand Name and Logo
Tag language
Product model and specification marking
Barcode Requirements
Quantity of inner boxes and outer cartons
Destination country or region
Required materials or inspection documents
Before printing and applying private-label packaging, it is necessary to reconfirm that the bulk production batch uses the same syringe barrel, needle hub, and connection type as the sample.
If the sample differs from the mass‑produced product in terms of structure or welding method, such differences must be confirmed in writing prior to production to prevent the customer from discovering discrepancies between the product and the sample upon receipt of the bulk order.
Veterinary Needle Price Inquiry List
To obtain a more accurate quotation, the purchaser may prepare the following information in advance.
Product Specifications
G number
Syringe length
Needle holder specifications
Needle tip or perforated form
Syringe material
Needle holder material
Compatible syringe model
Single-use or reusable requirements
Packaging Requirements
Quantity per box
Single-unit packaging or bulk
OEM brands and labels
Barcodes and outer carton markings
Tag language
Procurement and Quality Requirements
Product drawing
Material file
Number of samples
Minimum order quantity
Do you need to place a mixed-specification order?
Production lead time
Sales Destination
Inspection Requirements
Product Change Notification Requirements
If the customer is unable to determine the needle hub specification at this time, they may provide WanJia Medical with the existing syringe model, needle samples, and information about the target market. This approach is more reliable than selecting a needle hub solely based on product photos.
Conclusion
Gauge and length are only part of the specifications for veterinary needles.
For distribution, wholesale, or OEM orders, the purchaser must also confirm the needle hub, connection type, needle tip design, materials, packaging, and compatible syringes. Verifying these details in advance helps minimize issues such as correct samples that do not match bulk production, inability to connect the needle hub, or incorrect packaging labeling.
If you are interested in injection needles, ear tags, continuous syringes, or disposable medical supplies, please feel free to contact us. 🏭 Shaoxing Wanjia Medical Devices Co., Ltd. 🌐 https://www.wanjiaqx.com/
Other Exhibitions
2026-10-31
May 18–20, 2024, AGRAme2024 Dubai
2024-05-22